JL Audio Fathom® IWSv2-SYS-213
In-Wall Subwoofer System with Dual 13.5-inch Subwoofers, 2000 watts
The same minds that engineered JL Audio’s reference-grade Fathom® and Gotham® powered subwoofers have created an amazing in-wall subwoofer solution, centered on an innovative, thin-line driver with groundbreaking technologies.
Housing this exotic driver is a critically engineered enclosure with a unique floating mount design to minimize wall excitation. The enclosure features extensive architectural features aimed at improving rigidity while keeping a very low profile and minimal wall thickness.
Engineered With Care:
A paintable, fine steel-mesh grille, also designed to control vibration, is included for each enclosure in the system.
The IWSv2-SYS-213 is driven by a rack-mountable, purpose-tuned amplifier, capable of delivering up to 2 kW of clean power, and armed with serious processing features, including our latest Digital Automatic Room Optimization system.
There is no need to lower your expectations when selecting this remarkable in-wall solution... it's a real Fathom®.
The IWSv2-SYS-213 is available to fit a variety of 2" x 4" and 2" x 6" wall studs. Consult your Authorized JL Audio Dealer for specific application information.
|Enclosure Finish||Black Texture-Coated|
|Frequency Response (anechoic)||26 Hz - 101 Hz (± 1.5 dB) -3dB at 25 Hz / 112 Hz -10dB at 22 Hz / 150 Hz|
|Effective Piston Area (Sd)||196.51 sq in / 0.1268 sq m|
|Effective Displacement||294.6 cu in / 4.82 L|
|Amplifier Power||2000 W RMS short-term|
|Power Mode(s)||Off, On or Automatic (Signal-Sensing)|
|Light Modes||Off, On or Dim|
|Unbalanced Inputs||Stereo or Mono (two RCA jacks - Input Impedance of 50k Ohms)|
|Balanced Inputs||Balanced Inputs|
|Speaker/High-Level Inputs||N /A|
|Input Grounding||Isolated or Grounded|
|Input Modes||Master or Slave|
|Level Control||Reference (fixed gain) or Variable, from full mute to +15dB over reference gain|
|Filter Slope(s)||12/24 dB/octave|
|Filter Frequency Range||30 Hz - 130.1 Hz|
|Filter Defeat Function||Yes|
|Polarity||0 or 180 degrees|
|Phase||Variable, 0- 270 degrees, referenced to 80 Hz|
|Extreme Low Frequency (E.L.F.) Trim||Variable, -12 dB to +3 dB at 23 Hz|
|Output to Slave||Balanced (one male XLR jack)|
|Calibration Mode||Digital Automatic Room Optimization (D.A.R.O.), includes laboratory-grade microphone|
|2 x 4-inch Wall Stud Enclosure Physical Specifications|
|Wall Cavity Width||Minimum: 14.375 in / 365 mm Maximum: 14.875 in / 378 mm|
|Wall Cavity Height||Minimum: 93.625 in / 2,378 mm|
|Dimensions W x H x D||349 x 1778 x 75mm|
|2 x 6-inch Wall Stud Enclosure Physical Specifications|
|Wall Cavity Width (W)||Minimum: 14.375 in / 365 mm Maximum: 14.875 in / 378 mm|
|Wall Cavity Height (H)||93.625 in / 2,378 mm|
|Dimensions W x H x D||349 x 1397 x 119|
|Grille Physical Specifications|
|Wall Opening Height||419 mm|
|Wall Opening Width||406 mm|